Let’s face it. You have got your new electric guitar in hand. Now that you are all set to hit the strings. Hold on! What about tuning? Is it on track? Sounds like not! So before you proceed, you should know how to tune an electric guitar.
No matter what your skill level, it is essential to know how to do this properly. Do you know that being able to play an electric guitar correctly is like a dream come true! But, your journey isn’t just this far.
You also need to get the sound right before you put your fingers over the strings. Suppose you know the best electric guitar techniques. Even after that, you cannot be a good guitarist, if you don’t know how to tune it.
Most of the time, the guitar falls out of tune because of changes in the environment, temperature, and playing style. Whatever is the reason, it’s high time you know the ways to tune it. There we go.
Before you tune your electric guitar, make sure to pay attention to the following things.
Bring Superior-quality Strings
In any way, you should compromise with any random quality strings. This is what makes the sound. However, you’ll get a variety of options in the market. We would suggest buying D’Addario, Gibson, SIT, Fender, etc.
Replace Old Strings
First of all, you need to replace those old faulty strings with a brand new one. You cannot tune your guitar with old and worn-out guitar strings. While replacing old strings, you should never change two inline strings at once.
Say, if you change the 6th string at first, place a new string in place and tighten it. Do the same with 2nd, 5th, 3rd, and finally 1st one. You should follow this skipping pattern to maintain equal tension across the neck. It makes sure that your pitch isn’t affected.
So far, you should remove the 6th string by rotating the tuning peg clockwise. Now, pull the crimped portion of string through the peg hole. Pull the rest by the ball end of the string through the opening and out the guitar’s back.
At this point, keep the all six tuning peg in line. Turn string 3 to 1 clockwise to tighten. Now undo the new string and guide it toward the hole in the guitar’s back near the bridge.
Then pass the strings small end through the tuning peg and turn it to tighten. The string should rest in the bridge saddle. Finally, wrap the string over tuning peg to secure it. Make sure to place it opposite the direction of the turn. Repeat the same for the rest strings.
Before we start tuning, make sure to check different harmonics strings at 12th fret. You may use an electric tuner to do this.
Know Few Things…
You should know the accurate pitch of each string before starting. Electric guitar’s open string or standard tuning is as follows, E A D G B E, from 6th strings to 1st. These are guitars reference notes; here, you should use low E as a reference note.
You will have to tune your guitar depends on the reference note to get the right tune. Once you tune one string correctly, other strings can be tuned considering low E as the reference note.
How to Tune an Electric Guitar?
At the start, you might think it is too difficult. Relax. It is not that difficult, and you can do it without any professional help. All you need to do is to follow our easy instructions.
- At this point, your guitar’s strings are replaced successfully. Now it’s time to tune them up. As we mentioned earlier, consider low E as the reference note.
- Now start with low E, at 6th Play low ‘E’ and fifth fret ‘A.’ Tune ‘A’ string until it makes sound the same as ‘E.’
- When ‘A’ string is tuned, play it and also fifth fret ‘D.’ If it doesn’t sound the same, tune ‘D’ string until it sounds the same.
- With ‘D’ string going, play fifth fret ‘G.’ Tune ‘G’ string until it produces the same sound like ‘D.’
- Get your ‘G’ string going and then comes to fifth fret ‘B.’ Tune it until you hear the same sound.
- Finally, move on with ‘B’ string and fifth fret ‘e.’ Tune ‘e’ string as long as it produces the same sound.
Once you have done the above jobs, your electric guitar will tune-up. If you are doing it for the first time, you may find different pitches while tuning.
No worries, don’t give up. Keep practicing as long as you would be able to tune your electric guitar correctly. Even after tuning with precision, your electric guitar may slip out of tune. Read on below to know what to do in different situations.
How to Keep an Electric Guitar in Tune?
Install The Strings Correctly
The way of installing the strings does matter to keep it in tune. You need to make sure that the strings are placed on the guitar at the string’s ball end. Also, you should use a few neat winds around the tuner post.
Stretch The Strings Well
Electric guitars tune may slip out if the strings are not stretched properly. This is what most guitar service companies have to face. Due to this, your guitars string won’t provide proper tension. That’s why you should stretch the strings every time before playing.
Replace Strings Before Getting Old
Whether the string is from the best brands, it does have a lifespan. Though you keep them clean, there comes the point when they won’t intonate better. It is essential to change the strings immediately.
Lubricate “Sticking Points”
Even after good setup and new string, your electric guitar string may be stuck at specific points. Most of the time, it happens at the bridge and nut. It can be anywhere where the string makes contact. You should lubricate those points to keep them in tune.
Understand Playing Techniques
Your play technique make differences to keep your guitar in tune. Don’t press the strings too firmly contrary to the fretboard while holding notes. Never pull down it while holding chords.
These things may cause the strings to sound too sharp. Also, if you strike them too hard, it may sound sharp. You should understand the proper playing technique before playing the guitar.
Keep Your Electric Guitar In Safe Place
Your surrounding environment or temperature may affect your guitar or strings. Electric guitars strings will expand when it is too warm or contract while too cold.
That’s why you should keep your electric guitar in a place where temperature variation cannot affect your guitar. Make sure the place is not too hot or too cold.
Every electric guitar owner would certainly find themselves with a question, how to tune an electric guitar? Now you know it, all that’s left is to hit the strings to make the best sound ever.