Want to record guitar on your PC like a pro? However, don’t know how to record electric guitar on PC?No worries. We’ll guide you with the best ways to record electric guitar with professional studio-quality sound onto your PC.
No matter at home or outside, music has no exception to becoming creative. The electric guitar is one of the most helpful instruments in the journey to being artistic. And, using an electric guitar is simplistic only when you know it better.
When it comes to recording electric guitar, there come some typical ways. In any way, you need to experiment, listen, tweak, and try again until you get the desired sound.
With a recording interface and some gears, you can now record electric guitar on PC like a pro. In this article, we’ll discuss the ways to record electric guitar using different recording gears. Read on for more details.
To record your electric guitar onto your PC, you’ll need a digital setup at home. You’ll also need the following tools and recording gears. Make sure to set up all these tools up to par.
Since an electric guitar produces an audio signal, it has to convert into a digital signal. To do so, you’ll need an audio interface. When you need to record one thing simultaneously, get an audio interface with a few channels.
For recording many inputs at a time, you will certainly need to upgrade into more inputs. All in all, from beginner recorder to expert, everyone needs an audio interface.
Digital Audio Workstation (DAW)
To record electric guitar onto a PC, you need a digital audio workstation. It’s a software program to capture and mix your recordings. DAW is all about a virtual version of the large mixing board.
Before you start recording, make sure to get a suitable DAW into your PC.Here is a few of our recommendation;
- Studio one
- Pro Tools
- FL studio
- Cakewalk Sonar
When you set your audio interface and DAW, you can now start recording. Before that, you need to connect an amp to the audio interface. Otherwise, you will be recording a dry signal.
Probably you are wondering which one is the best plugging. Well, the best one is what allows you to form your tone with the amp. It should record a dry signal from the guitar and provides the best quality sounds for your recordings. Here is some of the best plugging;
- iRig HD2
- AmpliTube 4
- Guitar Rig 5
- BIAS FX
It’s an effect that offers an easy way to record an electric guitar with a decent tone. Amp modeling provides a range of amp tones. Depending on your players, you may also need a real amplifier.
Choosing a better studio monitor is mandatory. It ensures you hear the real tone that you mix through the speaker.
If you are using a microphone, you’ll need a good-quality headphone. The headphone is required for checking your own recording. We will recommend using a direct box (DI) instead of a microphone for recording electric guitar.
How to Record Electric Guitar on PC?
Up to now, you know what you need for your recording setup. So, you have all the necessary software and hardware for recording. Now follow the guide to start with the above equipment.
Get a Direct Box or Microphone
While recording through the electric guitar, it is required to stimulate sound quality. You can do this either by miking the amp or plugging the guitar into a DI. Using a mic seems to be expensive, so it is better to use DI.
However, DI only allows natural recording sound from the guitar without any effects. You can choose between active DI and passive DI. Active DI requires a power supply to operate, and passive DI doesn’t. For electric guitar, active DI is the best option.
Prepare Your Electric Guitar
At this point, check the settings on your electric guitar. You may want to tune your guitar to work your guitar as you wish. Check whether you need to replace the strings for a brighter tone. Make sure to apply a fretboard lubricant to your guitar to prevent unwanted squeaking.
Connect Your DI
To connect your DI with your electric guitar, you will need ¼” output cable. Connect the DI output with yourmixing console or audio interface or computer.
Play Your Electric Guitar
Now set your DAW and audio interface to your guitar and play music. Load a song you know well into the DAW or record your own track. Once you are done recording, listen to what you have made through headphones.
When you record the song, DI only seized the guitar sound that might sound thin. You will need to use amp here.
Setup Amp Tone
Depending on your desired sound quality, you may need a large amp to capture distortion and sizzle. A guitar amp works best as a speaker cabinet to record electric guitar.
If you are using an amp simulator, adjust recording through the stimulator’s interface.Take some time to adjust the equalizer on the guitar amp. Change until you get the desired sound quality into the headphones.
Record While Playing Electric Guitar
With the sound-quality and everything in place, you need to begin playing and record. If the music has multiple tracks, create numerous tracks into your DAW, and record each part. Check the recording once you are done.
Improve Sound Quality With Filters
Once you record your track into your PC, you can polish it through your DAW or audio interface. All you need to do is to use a filter on your PC. Use the filter to highlight features like clarity and focus, softer high frequencies, and sound’s body. Now your track from an electric guitar is ready to go.
This is how to record electric guitar on PC. Remember, whatever you have captured, it might not be the best. Only practice, tuning, and tweaking can make it the best. The cherry on the cake is, there’s always more to learning case of the guitar!